Compact Track Loader Parts CAT, Bobcat, Takeuchi, and Every Major CTL Brand

Ground Condition Is the Machine's Identity and the Parts Strategy That Follows

Every machine category in the compact equipment range has a defining operating characteristic. For the skid steer, it is the zero-turn differential drive. For the mini excavator, it is precision dig work in confined spaces. For the compact track loader, it is the ground beneath it, specifically, the ground that every other compact machine avoids.

Soft, wet, and unstable ground is not a limitation for a compact track loader. It is the operating environment the machine was engineered for. Landscaping on freshly worked topsoil, construction staging on sites with no compacted base, agricultural work on paddock surfaces that carry neither the hardness for tyres nor the clearance for a full-size track machine, these are the conditions where the CTL earns its place in the fleet. Rubber track undercarriage spreads the machine's ground pressure across a contact area that no pneumatic tyre can match, and that low ground pressure is what allows the machine to work without churning or sinking.

Understanding the relationship between ground condition, undercarriage load, and parts demand is the starting point for sourcing compact track loader parts correctly.

Compact Track Loader Parts Full System Coverage

The undercarriage carries the highest maintenance intensity on any CTL, but every working system on the machine contributes to operational reliability. Imara Engineering's compact track loader parts catalogue covers all of them:

Undercarriage and Track System:

• Rubber tracks — sized and specified by machine make, model, and track width
• Steel track alternatives for hard surface and demolition applications
• Drive sprockets and sprocket segments
• Front idlers and idler hub bearing assemblies
• Bottom rollers and top carrier roller assemblies
• Recoil spring and tensioner components
• Track frame hardware and undercarriage guard assemblies

Hydraulic System:

• Lift arm and tilt cylinder assemblies
• Hydraulic pump and motor components
• Travel motor assemblies and drive system hydraulic circuits
• Control valve bodies, hoses, O-ring seal kits, and filter assemblies

Drive System and Final Drive:

• Final drive gearbox assemblies and sprocket drive components
• Drive motor seals and bearing assemblies
• Brake system components and parking brake hardware

Lift Arm, Attachment Interface, and Loader:

• Lift arm pins, bushings, and pivot hardware
• Coupler and attachment interface components
• Bucket teeth, cutting edges, and wear plates for standard and grading bucket configurations

Engine, Cooling, and Service:

• Engine components are cross-referenced to the manufacturer and model
• Cooling system parts — radiators, fan assemblies, and water pump components
• Air filtration, fuel system components, and scheduled service kits

Cab and Electrical:

• Cab glass, door seals, and ROPS structural hardware
• Operator controls, instrument displays, and switch assemblies
• HVAC components, lighting harnesses, and electrical system components

CTL Parts by Brand and Model: Full Manufacturer Coverage

CAT Compact Track Loader Parts

Cat compact track loader parts represent the highest sourcing volume in the CTL category, and the model depth at Imara Engineering reflects the specification differences that CAT's compact track loader production history carries. Two platform-specific references dominate the sourcing requirement:

• Cat 247 track loader parts — the 247 is a widely deployed compact track loader platform across construction, landscaping, and utility applications. Undercarriage, hydraulic, and powertrain components are catalogued as 247-specific references, not generalised CAT compact loader parts.
• Cat 257 track loader parts — the 257 carries a different frame size, hydraulic output, and track system specification from the 247. Parts between the 247 and 257 are not interchangeable, and model confirmation is the starting point for every order.

Both platforms are covered with OEM-quality and aftermarket options across all working systems. Every cat compact track loader parts order is cross-referenced to the model designation and serial number before dispatch.

Bobcat Track Loader Parts

Bobcat's compact track loader range carries the same model-variant complexity as their skid steer and mini excavator lines, and the same sourcing discipline applies. Two platform-level references are catalogued as distinct models at Imara Engineering:

• Bobcat T190 track loader parts — the T190 is one of the most widely operated compact track loaders in the rental and construction market globally, with a specific rubber track specification, hydraulic system configuration, and lift arm geometry.
• Bobcat T300 track loader parts — the T300 represents a higher-capacity platform with a larger frame and updated hydraulic and drive system relative to the T190. Component specifications between the T190 and T300 are distinct, and parts sourcing requires the correct model reference from the outset.

Both OEM-quality and aftermarket Bobcat track loader parts are available across all working systems, with global shipping from the point of order.

Takeuchi Track Loader Parts

Takeuchi is one of the few manufacturers whose compact track loader line carries a design heritage specifically developed around the track platform rather than adapted from a wheeled base. That engineering focus is reflected in the component specifications and sourcing takeuchi track loader parts correctly requires model-level accuracy:

• Takeuchi TL130 parts: the TL130 platform covers a mid-range compact track loader configuration with distinct undercarriage and hydraulic specifications
• Takeuchi TL150 parts: the TL150 carries a larger frame and higher rated operating capacity, with its own undercarriage width, drive system, and hydraulic output configuration

Both platforms are catalogued as separate model references within the Imara Engineering CTL parts inventory.

ASV, New Holland, and Case Compact Track Loader Parts

• ASV track loader parts — ASV pioneered the rubber track compact loader category, and their machines carry distinctive Posi-Track undercarriage configurations. ASV undercarriage components — particularly rubber tracks and drive system parts require ASV-specific sourcing rather than generic CTL cross-reference.
• New Holland track loader parts — New Holland's compact track loader range is built around the same platform architecture as the Case CTL line, with shared design origins producing some component commonality. However, model-specific cross-referencing remains the standard at Imara Engineering to confirm fitment accuracy for every New Holland track loader parts order.
• Case compact track loader parts — Case CTL platforms, including the Series 3 and Series 4 configurations, are catalogued with component-level depth across undercarriage, hydraulic, and powertrain systems.

Rubber Tracks: The Highest-Value Sourcing Conversation on a Compact Track Loader

On most earthmoving machines, no single consumable component carries as much operational significance per replacement event as a rubber track on a compact track loader. The rubber track is simultaneously the most wear-intensive component on the machine and the one most directly responsible for the machine's performance in the ground conditions it was built to handle.

Rubber track selection on a compact track loader is not simply a size specification exercise. Track pattern, rubber compound, lug height, and steel cord arrangement all influence how the track performs in the operating environment, and the wrong specification in the wrong application can accelerate wear significantly. A track pattern optimised for soft ground landscaping work delivers different longevity on a construction site with concrete rubble and hard-standing surfaces.

When sourcing rubber tracks as part of a broader compact track loader spare parts order at Imara Engineering, the key specifications to confirm are:

• Track width and pitch — confirmed against machine make and model
• Track length — number of links matched to the specific undercarriage configuration
• Pattern selection — multi-bar, C-lug, and block configurations matched to the operating environment
• Rubber compound grade — standard versus reinforced for abrasive and high-impact applications

Both OEM-quality and aftermarket rubber track options are available across every CTL platform in the catalogue, with fitment confirmed to machine model and undercarriage configuration before every dispatch.

Aftermarket CTL Parts: Keeping Compact Track Loaders Running Without Overcapitalising

Compact track loaders occupy a specific cost position in any fleet. They are purpose-built machines with genuine capability, but they are not the highest-value assets in the equipment inventory. Parts procurement decisions on these machines need to reflect that position.

Aftermarket compact track loader parts deliver OEM-equivalent performance at a lower cost per replacement,t and for a machine category where undercarriage components cycle through at a meaningful rate, that cost difference across a season of operation is real. Rubber tracks, rollers, idlers, sprockets, hydraulic seals, bucket wear hardware, and service components are all categories where aftermarket options match OE specifications in the field without the OEM price premium.

Every aftermarket CTL parts option at Imara Engineering is sourced to match OEM performance standards and cross-referenced to the specific machine platform before dispatch. The same fitment accuracy process that applies to every OEM-quality order applies equally to every aftermarket compact track loader spare parts dispatch model designation and serial number confirmed before anything ships.

Ordering Compact Track Loader Parts from Imara Engineering

Whether the order is for a planned undercarriage replacement, a hydraulic system repair, or an urgent breakdown on a live site, the process is built for fitment accuracy across a machine category where model specificity matters:

1. Identify your exact platform — brand and model designation first, then serial number. The CAT 247 and 257, Bobcat T190 and T300, and Takeuchi TL130 and TL150 are distinct machines — parts between them are not assumed to be compatible without serial number confirmation.
2. Select by system — undercarriage and rubber tracks, hydraulics, drive system, lift arm, engine, or cab and electrical.
3. Confirm OEM or aftermarket — both are available with full specification details before any commitment is made. For high-wear items, aftermarket is frequently the right selection.
4. Place your order — global shipping is arranged from the point of order with full tracked dispatch included on every consignment.
5. Reach out for sourcing support — for older CTL configurations, regional build variants, or platforms with thin mainstream catalogue coverage, contact Imara Engineering directly for part identification and sourcing assistance beyond the standard catalogue.