Shop Perkins Fuel Injection Pumps by Engine Family
Perkins injection pumps are specified by engine series and cylinder configuration, and in many cases by build variant within the same engine series. Use the engine family below that matches your machine to confirm the correct pump for your application.
Perkins 4-Cylinder Diesel Injection Pumps
The Perkins 4-cylinder engine family is the most widely deployed configuration across the Perkins range, powering compact and medium excavators, light construction machinery, generators, and agricultural equipment across a broad range of global applications. The 4-cylinder injection pump is consequently the highest-frequency service item in our Perkins pump catalogue. Our 4-cylinder range covers:
- Perkins 4-cylinder diesel injection pump for all standard 4-cylinder engine configurations across the Perkins range
- Perkins 4.236 injection pump for the 4.236 one of the most enduring and widely serviced Perkins engines still in active fleet use across East Africa and globally
- Perkins Delphi injection pump variants for 4-cylinder engine configurations, where Delphi is the OEM-specified pump supplier
- Individual pump replacement units for direct-swap maintenance and complete pump supply for full engine overhauls
The 4.236 engine alone has powered an enormous installed base of equipment across agricultural, construction, and industrial applications over several decades of production, and its injection pump remains one of the most commonly sourced service items in the Perkins catalogue. Imara Engineering confirms your engine's specific pump variant from the serial number and application details before dispatch to ensure the correct specification is supplied.
Perkins 6.354 Injection Pump
The Perkins 6.354 is a larger displacement inline six-cylinder diesel engine used across medium and heavy equipment, including construction machinery, industrial power units, and commercial vehicles where greater output and torque capacity were required than the 4-cylinder family could provide. The Perkins 6.354 injection pump is a regular service item across the installed base of 6.354-powered equipment still in active operation. Our 6.354 range covers:
- Perkins 6.354 injection pump for all standard 6.354 engine configurations across the production history of this engine series
- Perkins 6354 injector pump units cross-referenced to OEM part references for confirmed fitment across applicable 6.354 build variants
- Delphi injection pump variants for 6.354 configurations, where Delphi was the OEM pump supplier specification
The 6.354 was produced across a significant build history, and pump variants differ across production stages of the same engine series. Imara Engineering confirms that the correct pump specification from your engine serial number before dispatching the model code alone is not sufficient for reliable fitment confirmation on this engine family.
Perkins 4.108 Injection Pump
The Perkins 4.108 is a compact, low-displacement four-cylinder diesel engine fitted to the smallest machines in the Perkins equipment lineup, including sub-compact excavators, small generators, and light agricultural equipment. The Perkins 4.108 injection pump is a compact and application-specific unit that requires accurate identification before ordering. Our 4.108 range includes:
- Perkins 4.108 injection pump for all standard 4.108 engine configurations in compact equipment applications
- Replacement pump units cross-referenced to OEM part numbers for confirmed fitment on the 4.108 engine series
- Individual and set supply options for single-pump fault replacement and complete engine overhaul scenarios
Perkins 3-Cylinder Diesel Injection Pumps
The Perkins 3-cylinder engine family powers the most compact machines in the Perkins lineup, including small excavators, compact generators, and light agricultural and industrial equipment. The injection pump fitted to these engines is a compact unit sized for the reduced cylinder count and displacement of the 3-cylinder configuration. Our 3-cylinder range covers:
- 3-cylinder Perkins injection pump for all standard 3-cylinder engine configurations across the Perkins range
- Perkins Delphi injection pump variants for 3-cylinder engines, where Delphi is the OEM-specified pump supplier
- Individual replacement pump units for direct-swap repairs on compact Perkins-powered equipment
- Complete pump supply for full engine overhauls, requiring a new pump as part of a broader fuel system refresh
If you are unsure of your engine's cylinder count, your machine's nameplate or engine serial number will confirm the configuration. Contact our parts team with those details, and we will identify the correct pump before your order is placed.
Perkins Lift Pump: Low-Pressure Fuel Supply
The Perkins lift pump is the low-pressure fuel transfer pump that draws diesel from the tank and delivers it to the injection pump at the controlled flow rate and inlet pressure the high-pressure pump depends on for correct operation and internal lubrication. A failing Perkins diesel lift pump starves the injection pump of its fuel supply, causing hard starting, power loss under load, and accelerated injection pump wear that is regularly misdiagnosed as a primary pump fault before the lift pump is correctly identified as the root cause. Our Perkins lift pump range is stocked within the Fuel Lift Pumps collection for operators requiring both low-pressure and high-pressure pump replacement on a Perkins fuel system service.
Perkins Injection Pump Suppliers: CAV, Delphi, and Lucas Explained
Perkins diesel engines across the 4-cylinder and 3-cylinder families have been fitted with injection pumps from three primary OEM suppliers across their long production history. Understanding which supplier variant your engine uses is an important step in correct pump identification.
CAV Injection Pumps. CAV later acquired and rebranded as Lucas supplied rotary distributor injection pumps to Perkins across a broad range of 4-cylinder and 3-cylinder engine applications. The CAV rotary distributor pump is a compact, single-element design that delivers fuel to each cylinder in sequence and is well supported in the aftermarket with strong parts availability.
Delphi Injection Pumps. Delphi, the successor brand to Lucas CAV, following corporate restructuring, supplies Perkins Delphi injection pump variants across the current and recent production Perkins engine range. Delphi pumps fitted to Perkins engines carry the same rotary distributor architecture as the earlier CAV units and are manufactured to the same precision delivery standards. Imara Engineering stocks Delphi variants for applicable Perkins 4-cylinder and 6.354 engine configurations.
Lucas Injection Pumps Lucas CAV supplied injection pumps to Perkins engines across the mid-production era between the original CAV period and the Delphi rebrand. Lucas-branded pumps for applicable Perkins engine families are catalogued and cross-referenced within our collection to the correct engine series and OEM part reference.
If you are unsure which supplier variant your engine carries, the pump's own data plate, typically mounted on the pump body, will identify the manufacturer and pump model code. Contact our parts team with the data plate information and your engine serial number for confirmed fitment before ordering.
Warning Signs Your Perkins Injection Pump Needs Replacing
Perkins diesel engines are reliable and durable under correct maintenance, but injection pump wear is a normal part of any high-hours diesel maintenance cycle. Watch for these symptoms on your Perkins machine:
-
Hard starting or failure to start — a Perkins injection pump losing pressure calibration cannot build the fuel pressure required to fire the injectors at cranking speed, particularly on cold starts
-
Black smoke under operating load — pump delivery volume drift causing overfuelling and incomplete combustion, producing visible exhaust smoke when the engine is placed under work demand
-
Loss of power and weak throttle response — under-delivery at the pump, reducing the fuel volume reaching one or more cylinders below the level required for the engine's rated output
-
Rough idle or uneven engine running — pump delivery imbalance across cylinders producing uneven combustion at low RPM, most noticeable at idle and during light-load operation
-
Increased fuel consumption without a corresponding change in workload — pump calibration drift causing excess fuel delivery per cycle without delivering additional power output
-
Hard starting after the engine has been sitting unused — a sign of injector leakback caused by low pump residual pressure, or an early indication that the pump's internal delivery valve is failing
Multiple symptoms occurring together on a Perkins machine are a strong indicator that the Perkins fuel injection pump is the primary fault. Addressing it at the pump level before complete failure prevents secondary injector damage and avoids escalating the repair into a more costly fuel system overhaul.
Why Source Your Perkins Injection Pumps from Imara Engineering
-
OEM-specification pumps for the most serviced Perkins engine families: From the Perkins 4-cylinder diesel injection pump on a 4.236-powered excavator to the Perkins 6.354 injection pump on a larger construction machine, every pump in our catalogue is supplied to the original pressure calibration and delivery specification for that engine series.
-
Delphi, CAV, and Lucas variants all catalogued in one collection: Rather than navigating multiple specialist suppliers for different pump brands, Imara Engineering holds the applicable Delphi, CAV, and Lucas variants for the Perkins range within a single collection, so your pump and fuel system order is processed and shipped together.
-
Fitment confirmed from engine serial number before dispatch: Perkins pump variants differ across build years and production stages within the same engine family. Our parts team confirms the exact Perkins injection pump from your engine serial number and application details, not just the model code, before your order is placed.
-
Fast dispatch, worldwide shipping: Imara Engineering supplies Perkins fleet operators, workshop teams, and equipment dealers across East Africa and internationally. Orders are processed fast from our stocked warehouse and shipped worldwide, so your machine returns to operation without extended downtime.
-
Complete Perkins fuel system coverage in one order: If your injection pump fault has caused downstream injector wear, Imara Engineering stocks Perkins fuel injectors in a dedicated collection that can be combined into a single order. Fuel lift pumps, fuel lines, and fuel shutoff solenoids for Perkins equipment are also available, so the complete fuel system repair is one consolidated order from one supplier.
